OBS Studio에서 검은 화면을 수정하는 방법

OBS Studio는 사용자가 게임이나 화면을 전문적으로 스트리밍 할 수있는 오픈 소스 소프트웨어입니다. macOS 및 Windows 운영 체제 용 플랫폼이 있습니다. OBS는 일반적으로 기존의 화면 녹화 소프트웨어에 비해 화면 공유에 대한 더 많은 제어를 선호하는 고급 게이머가 사용합니다.

사용자가 온라인에서 화면을 공유하려고 할 때 '검은 화면'을 경험하는 문제가 OBS를 꽤 오랫동안 괴롭 혔습니다. 이 문제는 주로 전용 및 통합 두 가지 그래픽 옵션이있는 Windows 플랫폼 및 시스템에서 발생합니다. 이 기사에서는이 문제가 발생하는 이유와 해결 단계에 대한 모든 솔루션을 살펴 봅니다.

OBS Studio에서 검은 화면이 발생하는 원인은 무엇입니까?

광범위한 설문 조사를 수행하고 OBS를 사용하여 스트리밍 할 때 블랙 스크린이 발생하는 모든 사용자 사례를 분석했습니다. 분석 결과 문제를 일으킬 수있는 여러 가지 다른 범인을 발견했습니다. 그중 일부는 다음과 같습니다.

  • 전용 그래픽 간섭 : 응용 프로그램이나 게임을 시작할 때마다 운영 체제는 전용 그래픽 카드에서 리소스를 할당할지 아니면 일반 마더 보드 통합 그래픽을 통해 할당할지 결정해야합니다. 이 선택은 실행 메커니즘 측면에서 부정적인 영향을 미칠 수 있으며 OBS가 제대로 스트리밍하지 못할 수 있습니다.
  • 관리자 권한 : OBS가 전체 화면을 공유하기 때문에 컴퓨터가 액세스를 제한하여 콘텐츠를 표시하지 못할 수 있습니다. 일반적으로 관리자 액세스 권한으로 응용 프로그램을 시작하면 문제가 즉시 해결됩니다.
  • 32 비트 및 64 비트 응용 프로그램에서 충돌 : OBS에는 32 비트 및 64 비트라는 두 가지 버전의 응용 프로그램이 있습니다. 컴퓨터에 설치된 운영 체제 유형에 따라 올바른 버전을 선택해야합니다. 그렇지 않으면 응용 프로그램이 호환되지 않고 제대로 작동하지 않습니다.
  • 호환성 문제 : 또한 OBS가 최신 버전의 Windows와 호환되지 않는 몇 가지 사례를 발견했습니다. 여기서 호환성 모드에서 응용 프로그램을 시작하면 응용 프로그램이 예상대로 시작되고 작동합니다.
  • 오버 클럭킹 : 오버 클럭킹은 PC의 성능을 향상시킬 수 있지만 응용 프로그램에 악영향을 미칠 수도 있습니다. 오버 클럭을 비활성화하고 이것이 문제에 도움이되는지 확인할 수 있습니다.
  • 충돌하는 소프트웨어 : 백그라운드에서 실행중인 다른 유사한 캡처 소프트웨어도있을 수 있습니다. 이 소프트웨어는 OBS와 충돌 할 수 있으며 리소스 경쟁을 유발하여 OBS가 오작동하고 제대로 작동하지 않을 수 있습니다.
  • 캡처 옵션 : OBS에는 전체 화면 또는 특정 창 등과 같은 여러 캡처 옵션이 있습니다. 콘텐츠를 캡처 할 때 올바른 옵션을 선택해야합니다.
  • 오류 상태의 PC : 오류 상태 의 PC 가능성을 배제 할 수 없습니다. 이것은 일반적으로 오랫동안 컴퓨터를 종료하지 않았을 때 발생합니다. 전원 순환만으로 문제가 해결됩니다.
비슷한 상황이 발생하면이 문서를 따르고 우리가 정해 놓은 문제 해결 단계를 따를 수 있습니다. 여기에 문제를 피하는 데 사용되는 엄선되고 테스트 된 방법이 나열되어 있습니다.

위에서부터 솔루션을 따르고 효과적으로 아래로 작업해야합니다. 난이도와 효율성 측면에서 정렬됩니다. 행복한 문제 해결!

해결 방법 1 : 컴퓨터 전원 순환

광범위한 문제 해결을 시작하기 전에 컴퓨터의 전원을 껐다 켜는 것이 좋습니다. 단순히 전원을 껐다 켜면 OBS 블랙 스크린이 즉시 해결되는 몇 가지 경우가있었습니다. 전원 순환에는 컴퓨터를 완전히 종료하고 전원도 제거하는 것이 포함됩니다. 이렇게하면 컴퓨터가 모든 임시 구성을 제거하므로 다시 시작할 때마다 모든 것이 새로 초기화됩니다.

  1. 컴퓨터를 올바르게 종료하십시오.
  2. 전원이 꺼지면 전원 콘센트를 제거 하거나 노트북을 사용하는 경우 배터리를 꺼냅니다 .
  3. 이제 전원 버튼을 몇 초 동안 길게 누릅니다 . 이렇게하면 모든 전력이 소모됩니다.

2-4 분 기다린 후 모든 것을 다시 연결하고 문제가 해결되는지 확인합니다.

해결 방법 2 : OBS Studio의 올바른 버전 선택

OBS는 일반적으로 32 비트와 64 비트의 두 가지 버전으로 제공됩니다. Windows 운영 체제도 두 가지 버전으로 제공되기 때문에 소프트웨어는 두 가지 버전으로 제공됩니다. 32 비트 프로세서와 64 비트 프로세서의 큰 차이점은 수행 할 수있는 초당 계산 수로 작업을 완료 할 수있는 속도에 영향을줍니다. 이 솔루션에서는 OBS의 설치 디렉토리로 이동하여 비트 버전을 확인한 후 올바른 소프트웨어 버전을 선택합니다.

먼저 컴퓨터에 설치된 운영 체제의 버전을 확인합니다.

  1. 이 PC를 마우스 오른쪽 버튼으로 클릭 하고 속성을 선택 합니다.
  1. 컴퓨터 속성에서 시스템 의 부제목 아래를 확인하고 시스템 유형 앞의 유형을 확인하십시오 . 운영 체제 유형을 기록하고 아래 지침을 따르십시오.

이제 OBS의 설치 폴더로 이동하여 컴퓨터의 비트 아키텍처에 따라 올바른 버전의 응용 프로그램을 시작합니다.

  1. Windows + E 를 눌러 파일 탐색기를 시작합니다. 이제 대화 상자에서 OBS를 검색하고 이미지와 같이 파일 위치를 엽니 다.
  1. 이제 OS의 비트 버전에 따라 올바른 버전의 응용 프로그램을 선택하고 엽니 다. 문제가 해결되었는지 확인하십시오.

해결 방법 3 : 호환성 모드 변경

응용 프로그램에있는 호환성 모드 옵션에 대한 혼합 보고서를 받았습니다. 일부 사용자에 따르면 최신 버전의 Windows는 응용 프로그램에서 지원되지 않으므로 Windows 7로 호환성을 변경해야하는 반면 일부 사용자는 호환성 모드를 비활성화하면 문제가 즉시 해결된다고보고했습니다. 여기에서 두 가지 방법을 모두 시도하고 어떤 방법이 적합한 지 확인할 수 있습니다. 그렇지 않은 경우 설정을 기본값으로 되돌리고 다른 솔루션으로 이동하십시오.

  1. Windows + S를 누르고 OBS를 검색하고 응용 프로그램을 마우스 오른쪽 버튼으로 클릭 한 다음 파일 위치 열기를 선택 합니다 .
  1. 이제 실행 파일을 마우스 오른쪽 버튼으로 클릭하고 속성을 선택 합니다.
  1. 특성되면, 선택 호환성 탭을하고 확인 옵션 에 대한 호환성 모드로이 프로그램 실행을 . 이제 Windows 7 또는 8을 선택할 수 있습니다.
  1. 변경 사항을 저장하고 종료합니다. 이제 응용 프로그램을 시작하고 문제가 해결되었는지 확인하십시오.

해결 방법 4 : 관리자 권한 부여

화면이나 게임을 제대로 스트리밍 할 수없는 또 다른 문제는 애플리케이션에 적절한 관리자 권한이 없기 때문입니다. OBS는 사실상 모든 콘텐츠와 컴퓨터 사용을 온라인으로 공유하므로 관리자 권한을 부여해야합니다. 이 솔루션에서는이를 수행하고 이것이 문제를 해결하는지 확인합니다. 그렇지 않더라도 항상 옵션을 선택해야합니다.

  1. 이전 솔루션에서했던 것처럼 OBS의 실행 가능한 속성으로 이동합니다.
  2. 이제 클릭 호환성 탭확인 의 옵션을 실행 관리자 권한으로이 프로그램을 .
  1. 변경 사항을 적용하고 종료합니다. 컴퓨터를 다시 시작하고 OBS를 다시 시작하십시오. 이제 문제가 해결되었는지 확인하십시오.

해결 방법 5 : 리소스에 적합한 GPU 선택

우리가 발견 한 또 다른 흥미로운 현상은 사용중인 캡처에 따라 올바른 GPU를 선택하지 않으면 검은 색 화면을 비롯한 여러 문제가 발생했습니다. 선택한 디스플레이에 따라 선택할 GPU에 대한 분석은 다음과 같습니다.

  • 게임 캡처 : 전용 그래픽 (NVIDIA 또는 AMD).
  • 모니터 / 디스플레이 캡처 : Intel의 기본 GPU

참고 : 이 솔루션은 컴퓨터에 전용 그래픽 카드가 설치된 사용자에게만 해당됩니다.

여기서 우리는 두 가지 상황에 대처하는 방법에 대한 방법을 나타낼 것입니다. 귀하의 경우에 따라 따르십시오.

  1. 화면 아무 곳이나 마우스 오른쪽 버튼으로 클릭하고 NVIDIA 제어판을 선택 합니다 .
  2. 제어판에서 3D 설정 관리로 이동하여 프로그램 설정을 클릭 합니다 .
  3. 프로그램 설정에서 OBS 디스플레이 캡처를 선택합니다. 항목을 찾을 수없는 경우 추가를 클릭 하고 설치 디렉토리로 이동하고 거기에서 실행 파일을 선택하여 소프트웨어를 찾습니다.
  1. Now according to the type of capture you are doing (game or monitor), select the correct graphics processor for the program. In the case down below, NVIDIA’s processor is selected.
  1. Save changes and exit. Now restart your computer and launch OBS again. Check if the black screen issue is resolved.

Solution 6: Changing Drive Permission Settings

If your OBS is installed in your primary drive (C), there are chances that probably even your user might have not have full permissions to edit and modify its contents. This is the usual case and the reason why a conventional user is not allowed access to the drive is because of security reasons because all the core operating system files are present. However, according to some user reports, changing the ownership settings of the drive solved the issue instantly. Make sure that you are logged in as an administrator before following this solution.

  1. Press Windows + E to launch the File Explorer. Now right-click on your C drive (or whichever drive is set as your main operating system disk) and select Properties.
  2. Select the Security tab and then click on Edit in front of permissions.
  1. Now select the option of Authenticated users and select the checkbox of Full control.
  1. Press Apply to save changes and exit. Restart your computer and start OBS again. Check if the issue is resolved.

Solution 7: Changing Settings of OBS

Another workaround to consider is changing some specific settings of OBS. Usually, OBS allows users to set the configurations according to their own preferences or will. However, in some cases, the custom settings might conflict with the software and cause the black screen. Here we have listed down some of the changes in settings that you have to do in order for OBS to run in optimal settings.

Mode: *Select according to your preference* Screen: *Select according to your game* Priority: *Usually the default one suffices* Sli/crossfire: Check (You can also try unchecking this one later) Force scaling: Uncheck Transparency: Uncheck Framerate lock: Uncheck Record cursor: Check Anti-cheat: Uncheck Overlays: Uncheck

After you have made changes to the settings of OBS, restart it and check if you can stream your screen/games properly without any issues.

Note: You can also change the mode from “Capture any fullscreen application” to “Capture specific window“.

Solution 8: Enabling Multi-adapter compatibility

OBS has a setting of Multi-adapter compatibility which is meant for computers involving SLI or Crossfire technology. SLI/Crossfire is technologies by NVIDIA/AMD which allows users to connect two graphics cards instead of one and utilize them both in your gameplay or applications. Enabling this feature seemed to have fixed the issue of black screen in OBS instantly.

The funny thing is that this fixed the black screen in computers that don’t even have SLI/Crossfire technology installed. To conclude, we can safely say this is a bug in OBS and you have to enable multi-adapter compatibility whether or not you have SLI/Crossfire. You can easily enable this option by selecting the stream and clicking on the gears icon. A new window will pop up from where you can check the option.

Solution 9: Disabling Overclocking

Overclocking allows you to increase the clock rate of your processor until it reaches the threshold temperature set by the manufacturer. Once it reaches the temperature, the clock speed returns back to default so it is cooled down. After it reaches the optimal temperature, its clock speed is increased again and the cycle continues. Overclocking allows users to have better framerates and performance but they aren’t without their share of issues.

We observed that PCs that had overclocking enabled were having the black screen issue in OBS. You should try disabling overclocking and also overclocking related software such as MSI Afterburner and try launching OBS again. If the black screen issue is resolved, consider disabling overclocking for good whenever you are using OBS.

Note: Also try disabling Overlay from GeForce Experience and Windows game bar features. Take into account any additional software features which may provide additional controls over games or video.

Solution 10: Checking for conflicting software

Another reason why you might be experiencing the black screen on your OBS software is that you have additional software running in the background which is also related to screen capture and video recording. This is a very common scenario for users where they ‘think’ that the other third-party software is not running but in reality, it is in the background. In this solution, we will go through all the different software installed on your computer and uninstall all extra software which might be causing the issue.

  1. Press Windows + R, type “appwiz.cpl” in the dialogue box and press Enter.
  2. Once in the application manager, search for any recording software which you might have installed on your computer. Right-click on it and select Uninstall.
  1. You should also check your taskbar for any extra applications running in the background. Right-click on each entry and exit the application.
  1. After you are absolutely sure that no program is running the background, run OBS again and check if the issue is resolved.

Solution 11: Reinstalling the application

If all the above methods don’t work and you are still unable to stream your game/screen successfully using OBS, you should consider reinstalling the application entirely. It is possible that you have a corrupt/outdated copy with issues with several modules. All your preset configurations will be lost during this solution so make sure that you have saved all the work that you need.

  1. Press Windows + R, type “appwiz.cpl” in the dialogue box and press Enter.
  2. Once in the application manager, search for OBS, right-click on it and select Uninstall.
  1. Select both options (one of them will be preselected) and click on Uninstall.
  1. Restart your computer. Now navigate to OBS Studio’s official website and download the latest version from there. Install it and check if the issue persists in the fresh copy.